Hydraulic solar system kits (Solar KIT)

NOVASFER 6000
(Suitable for installations up to 16m2 collection surface)

The groups include the system shut-off valves with thermometer and non-return valve. It is possible to exclude the non-return valve in case of system maintenance. Integrated there is the safety group with a safety valve suitable for solar systems, connection for the expansion vessel and the plant manometer.

Complete with flow meter, available on request in different calibrations. And with connections for loading / unloading the circuit. On the delivery line the manual de-aerator which allows the system to be vented without the need to go to the roof.

GENERAL TECHNICAL SPECIFICATIONS

• Circulator GRUNFOS UPM3 SOLAR 15-75 130mm PWM.
• Double solar collector
• Ball valves with integrated thermometer.
• Inlet check valve.
• Sanitary water heater.
• Safety set with 6 bar safety valve and 0-10 bar pressure gauge.
• Gas boiler only heating
• Top / Bottom connection 1" ARP.
• Heating circuit

Dimensions (HxW): DN25 375mm x 250MM.
Manufacture Material: Brass.
Maximum Pressure: 6 bar.

Manual Novasfer

LOVATO
Maverick

GENERAL TECHNICAL SPECIFICATIONS

• Circulator WILO-Yonos PARA ST 25/7 PWM.
• Flow regulator 5-40 l/min with flow meter and valve for filling-emptying the network.
• Ball valves with integrated thermometer.
• Inlet check valve.
• Deaerator vent pipe with manual deaerator on intake.
• Safety set with 6 bar safety valve and 0-10 bar pressure gauge.
• Valve for filling - draining the network and supplying 3/4" ARS.
• Top / Bottom connection 1".
• Two-part EPP thermal insulation shell to minimize heat loss.
• Maximum pressure 6 bar.

Manufacture Material: Brass.
Maximum Pressure: 6 bar.

DIFFERENTIAL THERMOSTAT
(3 sensors included)

GENERAL TECHNICAL SPECIFICATIONS

• Differential central unit in DINRAIL type 6 fuse box enclosed in an IP 40 wall box for protection against power current interference, dust, moisture.
• Bright 2x8 line LCD screen on a green background with continuous status display of key functions (Configuration we have selected, Auxiliary Source Status, Sensor Temperatures and Relay Status).

Manual Controller